HP Nc4010 Hardware Guide - Page 87
until it is seated, then push the board downward, the retention clips snap into place.
View all HP Nc4010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Hardware Upgrades 9. Insert the memory expansion module: a. Align the keyed (notched) edge of the module 1 with the keyed area in the expansion slot. b. Press the module into the slot from a 45-degree angle until it is seated, then push the board downward 2 until the retention clips snap into place. Inserting a memory expansion module 8-8 Hardware Guide
8–8
Hardware Guide
Hardware Upgrades
9. Insert the memory expansion module:
a.
Align the keyed (notched) edge of the module
1
with the
keyed area in the expansion slot.
b.
Press the module into the slot from a 45-degree angle
until it is seated, then push the board downward
2
until
the retention clips snap into place.
Inserting a memory expansion module