HP NetServer AA 6200 HP NetServer AA 6200 Solution Release 3.0 Administrator&a - Page 90
Issuing Endurance Commands, MTCCONS the Endurance Manager Console
View all HP NetServer AA 6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Chapter 5 Commands Issuing Endurance Commands You can issue the commands using either: • Endurance Manager - the command syntax for this method is documented in the Command section of each command. • MTCCONS (the Endurance Manager Console) - the command syntax for this method is documented in the Console Syntax section of each command. Refer to page 181 for MTCCONS information, including a description of the MTCCONS parameters. Using Endurance Manager or MTCCONS, you can issue commands from: • The CE operating system • An IOP that is active in the server configuration • A properly configured remote workstation that is running Endurance Manager When using Endurance Manager, you can access the commands by the methods listed in Table 5-1. Table 5-1 Accessing Endurance Manager Commands To access... All commands Commands for a specific server component To execute command . . . 1. From the main dialog box menu, select Tools Display and Control. This displays the Display and Control dialog box. 2. Select the command and any parameters. 3. Click Apply. 1. In the main dialog box, double click on the component for which you want to execute a command. This displays only the commands that are available for that component in a Display and Control dialog box. 2. Select the command and any parameters. 3. Click Apply. 74