HP NetServer LH 3/LH HP Netserver Ultra3 SCSI HBA Guide - Page 17
Connecting External SCSI Devices
View all HP NetServer LH 3/LH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
50-pin SE Narrow SCSI cable Figure 1-9. Connecting Ultra/Fast Narrow Devices 2. Plug the other end of the cable to a terminated Ultra/Fast Narrow SCSI device. 3. If you have other Ultra/Fast Narrow SCSI devices, attach them to the connectors between the two ends of the cable. Be sure these other devices are unterminated. 4. Connect a power cable from your HP Netserver's internal power supply to each internal device. Connecting External SCSI Devices Connect external Ultra2 and Ultra3 SCSI devices to the 68-pin external LVD/ SE SCSI connector. Each external device will require a high density 68-pin external LVD SCSI cable. 11
11
Figure 1-9. Connecting Ultra/Fast Narrow Devices
2. Plug the other end of the cable to a terminated Ultra/Fast Narrow SCSI
device.
3. If you have other Ultra/Fast Narrow SCSI devices, attach them to the
connectors between the two ends of the cable. Be sure these other devices
are
unterminated
.
4. Connect a power cable from your HP Netserver’s internal power supply to
each internal device.
Connecting External SCSI Devices
Connect external Ultra2 and Ultra3 SCSI devices to the 68-pin external LVD/
SE SCSI connector. Each external device will require a high density 68-pin
external LVD SCSI cable.
50-pin SE Narrow SCSI cable