HP NetServer LH 3/LH HP Netserver Ultra3 SCSI HBA Guide - Page 66
Mount Status, Lock Status
View all HP NetServer LH 3/LH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Menu Choice 1. Volume Segments On Drive1 2. Read After Write Verify1 3. Drive Light Status1 4. Driver Operating Status1 5. Removable Drive Mount Status2 6. Removable Drive Lock Status2 Default Value (select for list) Hardware Level Not Supported Active Mounted Not Locked 1Valid for both removable and non-removable types of SCSI disk drives. 2Valid for removable media only. Mount Status Mounting causes a drive to come on-line as a NetWare storage device. Dismounted drives are inactive and cannot be accessed. Before you eject your current media, you should first Dismount it (menu choice 5). When the media status is Dismounted, you can eject the media. However, NetWare does not allow you to dismount it if the media is locked. To insert your new media, wait for the drive to spin-up, and then select the Drive Mount option. Lock Status If your removable-media device supports the Lock/Unlock feature, you can lock the media (menu choice 6). The media must be in the Not Locked state before you can eject it. If the media is Locked, it cannot be ejected when you press the Eject button. 60