HP NetServer LH 3/LH HP Netserver Ultra3 SCSI HBA Guide - Page 59
DOS Drivers for CD-ROM Access
View all HP NetServer LH 3/LH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
10. To install additional adapters, follow the procedures from Step 4. 11. When complete, select Continue to complete the installation. DOS Drivers for CD-ROM Access The CD-ROM drivers need to be installed only if DOS access to a CD-ROM drive attached to a SCSI host adapter is required. If NetWare is already installed, or if the CD-ROM drive is not connected to a SCSI adapter, these drivers do not need to be copied or installed. However, you may choose to install these drivers if you are having trouble accessing your CD-ROM from Netware. NOTE You do not need these drivers for Windows NT or UNIX. Install CD-ROM Drivers on a DOS Bootable Hard Disk The following systems files should be modified: • config.sys • autoexec.bat 1. Copy the files aspi8u2.sys and aspicd.sys from the DOS directory of the Ultra3 Family Manager Set disk to your C drive. At the DOS prompt, type the following lines and press Enter after each line: mkdir c:\scsi copy a:\dos\*.* c:\scsi 2. Modify config.sys for loading aspi8u2.sys and aspicd.sys, which is necessary for connecting a CD-ROM. Either create this file in C:\ if you do not currently have a config.sys, or add these lines to the existing config.sys file. Note that you may need to change the path for the drivers. device=c:\scsi\aspi8u2.sys /d device=c:\scsi\aspicd.sys /d:aspicd0 3. Modify autoexec.bat for loading mscdex.exe. Either create this file in C:\ if you do not currently have autoexec.bat, or add these lines to the existing autoexec.bat file: c:\dos\mscdex.exe /d:aspicd0 /m:12 53