HP NetServer LXr 8500 HP Netserver E 60, LC 3, LH 3/3r, and LPr Processor Upgr - Page 41
HP NetServer.
View all HP NetServer LXr 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 4 Installation in E 60 and LPr Disconnect the NetServer 1. Bring down the network properly. If necessary, shut down the network operating system. 2. Turn off power to the HP NetServer and the monitor. 3. DISCONNECT THE AC POWER CORD and all telephone cables from the HP NetServer. WARNING Before removing the cover, always disconnect the power cord and unplug telephone cables. Disconnect telephone cables to avoid exposure to shock hazard from telephone ringing voltages. Disconnect the power cord to avoid exposure to high energy levels that may cause burns when parts are short-circuited by metal objects such as tools or jewelry. Note that the power switch does not turn off the standby power. Disconnect the power cord to turn off standby power. CAUTION Wear a wrist strap and use a static-dissipating work surface connected to the chassis when handling components. 37