HP Nx9600 Compaq Presario X6000 and HP Compaq nx9600 Notebook PC - Maintenance - Page 118
Remove the audio/USB board cable from the base enclosure, through which it is routed.
View all HP Nx9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Removal and Replacement Procedures 2. Disconnect the audio/USB board cable 1 from the system board. 3. Remove the two PM2.0×8.0 screws 2 that secure the audio/USB board to the base enclosure. 4. Remove the audio/USB board cable from the base enclosure clips 3 through which it is routed. 5. Remove the audio/USB board 4. Removing the Audio/USB Board Reverse the above procedure to install the audio/USB board. 5-38 Maintenance and Service Guide
5–38
Maintenance and Service Guide
Removal and Replacement Procedures
2. Disconnect the audio/USB board cable
1
from the system
board.
3. Remove the two PM2.0×8.0 screws
2
that secure the
audio/USB board to the base enclosure.
4. Remove the audio/USB board cable from the base enclosure
clips
3
through which it is routed.
5. Remove the audio/USB board
4
.
Removing the Audio/USB Board
Reverse the above procedure to install the audio/USB board.