HP Nx9600 Compaq Presario X6000 and HP Compaq nx9600 Notebook PC - Maintenance - Page 97
board away from the socket at a 45-degree angle
View all HP Nx9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Removal and Replacement Procedures 3. Disconnect the auxiliary and main 1 antenna cables from the Mini PCI communications card. ✎ Make note of which wireless antenna cable is attached to which antenna clip on the Mini PCI communications card before disconnecting the cables. 4. Spread the retaining tabs 2 on each side of the Mini PCI socket to release the Mini PCI card. (The right edge of the card rises away from the notebook.) 5. Remove the wireless communications card by pulling the board away from the socket at a 45-degree angle 3. ✎ Note that the Mini PCI communications card is slotted 4 to prevent incorrect installation. Removing a Mini PCI Communications Card Reverse the above procedure to install a Mini PCI communications card. Maintenance and Service Guide 5-17