HP OMEN 15-dc2000 Maintenance and Service Guide - Page 49

Solid-state drive (SSD), Remove the Phillips M2.0×2.0 screw

Get HP OMEN 15-dc2000 PDF manuals and user guides View all HP OMEN 15-dc2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Solid-state drive (SSD) Table 5-3 Solid-state drive description and part number Description Solid-state drive 128 GB 256 GB 512 GB 16 GB Optane Memory Module 32 GB Optane Memory Module + 512 GB solid-state drive Spare part number L24339-001 L24340-001 L24341-001 L24342-001 L51797-001 Before removing the solid-state drive, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 34). 2. Remove the base enclosure (see Base enclosure on page 34). Remove the solid-state drive: 1. Remove the Phillips M2.0×2.0 screw (1) that secures the drive to the system board. 2. Remove the drive by pulling it away from the connector (2). NOTE: M.2 solid-state drives are designed with notches to prevent incorrect insertion. Reverse this procedure to install the solid-state drive. Component replacement procedures 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
Solid-state drive (SSD)
Table 5-3
Solid-state drive description and part number
Description
Spare part number
Solid-state drive
128 GB
L24339-001
256 GB
L24340-001
512 GB
L24341-001
16 GB Optane Memory Module
L24342-001
32 GB Optane Memory Module + 512 GB solid-state drive
L51797-001
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
34
).
2.
Remove the base enclosure (see
Base enclosure
on page
34
).
Remove the solid-state drive:
1.
Remove the Phillips M2.0×2.0 screw
(1)
that secures the drive to the system board.
2.
Remove the drive by pulling it away from the connector
(2)
.
NOTE:
M.2 solid-state drives are designed with notches to prevent incorrect insertion.
Reverse this procedure to install the solid-state drive.
Component replacement procedures
39