HP OMEN 15-dc2000 Maintenance and Service Guide - Page 59
Remove the Phillips M5 screws, that secure the fan to the computer.
View all HP OMEN 15-dc2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Remove the fan brackets: 1. Release the three screws (1) that secure the fan brackets to the computer. 2. Remove the fan brackets (2) from the computer. NOTE: To completely remove the right bracket, disconnect the power connector cable from the system board (see Power connector cable on page 50). Remove the fans: 1. Disconnect the fan cable (1). 2. Remove the Phillips M5 screws (2) that secure the fan to the computer. 3. Remove the fans from the computer (3). Reverse this procedure to install the fans. Component replacement procedures 49
Remove the fan brackets:
1.
Release the three screws
(1)
that secure the fan brackets to the computer.
2.
Remove the fan brackets
(2)
from the computer.
NOTE:
To completely remove the right bracket, disconnect the power connector cable from the system
board (see
Power connector cable
on page
50
).
Remove the fans:
1.
Disconnect the fan cable
(1)
.
2.
Remove the Phillips M5 screws
(2)
that secure the fan to the computer.
3.
Remove the fans from the computer
(3)
.
Reverse this procedure to install the fans.
Component replacement procedures
49