HP OMEN Notebook - 15t-5000 HP OMEN Notebook PC 15 Maintenance and Service Gui - Page 35

Heat sink and fans, Remove the heat sink and fans

Get HP OMEN Notebook - 15t-5000 PDF manuals and user guides View all HP OMEN Notebook - 15t-5000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Heat sink and fans NOTE: The heat sink and fans are spared together. Component Heat sink and fans (includes replacement thermal material) Spare part number 788600-001 Before replacing the heat sink and fans, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). 5. Disconnect the battery (see Disconnecting the battery on page 25). Remove the heat sink and fans: 1. Disconnect the cables from the system board for the left (1) and right (2) fans. 2. Remove the two Phillips PM2.0×3.5 screws (3) that secure each fan to the computer. 3. Loosen the six captive Phillips screws (4) on the heat sink. 4. Lift the fans and heat sink straight up and out of the computer (5). Heat sink and fans 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
Heat sink and fans
NOTE:
The heat sink and fans are spared together.
Component
Spare part number
Heat sink and fans (includes replacement thermal material)
788600-001
Before replacing the heat sink and fans, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
23
).
5.
Disconnect the battery (see
Disconnecting the battery
on page
25
).
Remove the heat sink and fans:
1.
Disconnect the cables from the system board for the left
(1)
and right
(2)
fans.
2.
Remove the two Phillips PM2.0×3.5 screws
(3)
that secure each fan to the computer.
3.
Loosen the six captive Phillips screws
(4)
on the heat sink.
4.
Lift the fans and heat sink straight up and out of the computer
(5)
.
Heat sink and fans
29