HP OMEN Notebook - 15t-5000 HP OMEN Notebook PC 15 Maintenance and Service Gui - Page 39

TouchPad, Disconnect the TouchPad cable from the system board

Get HP OMEN Notebook - 15t-5000 PDF manuals and user guides View all HP OMEN Notebook - 15t-5000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

TouchPad Component TouchPad (includes cable) Spare part number 788607-001 Before replacing the TouchPad, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). 5. Remove the battery (see Battery on page 31). Remove the TouchPad: 1. Disconnect the TouchPad cable from the system board (1). 2. Remove the Mylar from atop the middle screw of the touchpad (2). 3. Remove the five Phillips PM1.5×2.0 broad head screws (3) that secure the TouchPad to the computer. 4. Remove the TouchPad (4). Reverse this procedure to install the TouchPad. TouchPad 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
TouchPad
Component
Spare part number
TouchPad (includes cable)
788607-001
Before replacing the TouchPad, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
23
).
5.
Remove the battery (see
Battery
on page
31
).
Remove the TouchPad:
1.
Disconnect the TouchPad cable from the system board
(1)
.
2.
Remove the Mylar from atop the middle screw of the touchpad
(2)
.
3.
Remove the five Phillips PM1.5×2.0 broad head screws
(3)
that secure the TouchPad to the computer.
4.
Remove the TouchPad
(4)
.
Reverse this procedure to install the TouchPad.
TouchPad
33