HP OfficeJet 9010 User Guide - Page 109
To set up the printer on the same phone line as a computer with two phone ports
View all HP OfficeJet 9010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Figure 4-9 Back view of the printer 1 Telephone wall jack. 2 Connect the phone cord to the port labeled on the back of the printer. 3 Parallel splitter. 4 Computer with modem. 5 Telephone. To set up the printer on the same phone line as a computer with two phone ports 1. Remove the white plug from the port labeled on the back of the printer. 2. Find the phone cord that connects from the back of your computer (your computer dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled on the back of the printer. 3. Connect a phone to the "OUT" port on the back of your computer dial-up modem. 4. Connect one end of the phone cord to your telephone wall jack, then connect the other end to the port labeled on the back of the printer. NOTE: You might need to connect the phone cord to your country/region adapter. 5. If your modem software is set to receive faxes to your computer automatically, turn off that setting. NOTE: If you do not turn off the automatic fax reception setting in your modem software, the printer cannot receive faxes. ENWW Additional fax setup 103