HP OmniBook 7100 HP OmniBook 7100 PC Reference Guide - F1440-90001/2/3 - Page 20
ASK IR amplitude shift keyed IR, or FIR Fast IR
View all HP OmniBook 7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Introducing the OmniBook Configuring the OmniBook with the BIOS Setup Utility System Devices Menu Internal Pointing Devices External Fn Key Enables one or both built-in PS/2 devices. Sets whether left-CTRL + left-ALT on an external keyboard is interpreted as the Fn key. Default Both Enabled IDE Controller FDD Controller Serial Port Base I/O address Infrared Port Mode Base I/O address DMA channel Front/Back Parallel Port Mode Base I/O address Interrupt DMA channel Audio SB I/O address WSS I/O address AdLib I/O address Enables the primary (hard drive) and secondary Both (optional CD-ROM drive) controllers. Enables the floppy drive. Enabled Sets how the serial port is configured by the BIOS (specified or automatic). Enabled Sets the I/O address and interrupt. 3F8h, IRQ4 Sets how the infrared port is configured by the Disabled BIOS (specified or automatic). Sets the hardware to support SIR (Standard IR), SIR ASK IR (amplitude shift keyed IR), or FIR (Fast IR) infrared communications. (Driver installation required.) Sets the I/O address and interrupt. 2F8h, IRQ3 For Fast Ir mode, sets the DMA channel. DMA3 Sets which infrared port is active. Back Sets how the parallel port is configured by the Enabled BIOS (specified or automatic). Sets the port to normal, bi-directional, EPP, or ECP ECP. Sets the I/O address. 378h Sets the interrupt. IRQ7 For ECP mode, sets the DMA channel. DMA3 Sets how the audio system is configured by the Enabled BIOS (specified or automatic). Sets the Sound Blaster I/O address. 220h Sets the Windows Sound System I/O address. 530h Sets the AdLib synthesizer I/O address. 388h 1-12