HP OmniBook 7100 HP OmniBook 7100 PC Reference Guide - F1440-90001/2/3 - Page 76
Using PC Cards
View all HP OmniBook 7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Making Connections Using PC Cards Using PC Cards This section describes how to ♦ Insert a PC Card. ♦ Remove a PC Card. ♦ Select a compatible PC Card from a list of tested cards. To insert a PC Card Note Windows NT 4.0 does not support zoomed video. If you are using Windows NT 4.0, make sure you've installed Card Executive (see page 6-18 for instructions). The OmniBook PC Card slots are available for storing data and expanding the communication capabilities of the OmniBook. The OmniBook supports standard Type I, II, and III PC Cards (PCMCIA and CardBus). You can use two Type I or II cards or one Type III card. Both slots support Zoomed Video, which allows high-quality multimedia presentations. 1. . Important Do not remove a PC Card while the OmniBook is actively reading or writing data. Hold the card with its face up and its connector holes toward the card slot. 2. Slide the PC Card into the slot until it is flush with the OmniBook. 4-16