HP OmniBook xe4100 HP Omnibook xe4100 and xe4500 Series Notebook PCs - Referen - Page 21
Step 2: Connect AC power - charging cord
View all HP OmniBook xe4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Getting Started with Your HP Notebook Setting Up Your Computer CAUTION Important Step 2: Connect AC power Use only the HP AC adapter included with your computer (or other approved adapter that meets the power requirements of the computer). If "75W" is printed below the AC adapter socket on the computer, do not use a 60watt, 3.16-amp adapter, such as HP F1454A or F1781A, and do not use DC adapter accessories F1455A and F2297A. Using the wrong AC adapter could damage the computer or adapter and may void your warranty (see "Hewlett-Packard Limited Warranty Statement" on page 133). • Plug the AC adapter into the computer and connect the power cord to the AC adapter, then plug the power cord into a wall outlet. The computer's battery then starts charging. When unplugging the AC adapter, unplug the power cord from the outlet first. While the battery is charging, you can continue with step 3. Reference Guide 21