HP OmniBook xe4100 HP Omnibook xe4100 and xe4500 Series Notebook PCs - Referen - Page 66
Connecting to a LAN
View all HP OmniBook xe4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Modem and Network Connections Connecting to a LAN Connecting to a LAN If your model has a LAN port, you can connect to local area networks (LANs). LANs give you access to network resources, such as printers and file servers on your corporate network, and possibly to the Internet. To connect to a LAN 1. Check that the existing LAN supports Ethernet 10Base-T (10 Mbps) or 100Base-TX (100 Mbps) connections. 2. Plug the LAN cable (not supplied) into the built-in LAN port. The cable must have an RJ-45 connector. 3. Windows automatically detects and sets up a LAN connection. To edit settings, open Network and Dial-up Connections in Control Panel. See Windows Help for information about setting up and using LAN connections-click Start, Help and Support (or Help). Contact your network administrator for network information. Two lights next to the LAN port indicate the status of the connection: • The yellow light indicates network activity. • The green light indicates a 100 MB per second link. 66 Reference Guide