HP P2000 HP P2000 G3 MSA System Event Description Reference Guide - Page 28
Info., Recommended actions, Warning, Error - shutdown
View all HP P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
262 Info. In-band SES commands have been enabled. Recommended actions • No action required. 263 Warning The indicated disk spare is missing. Either it was removed or it is not responding. Recommended actions • Replace the indicated disk. 264 Info. The link speed of the port bypass circuit and interconnect mode has been set to the default. Recommended actions • No action required. 265 Info. Port bypass circuits currently use the service port, which may limit the link speed or interconnect mode support. Recommended actions • Perform a system-level shutdown and restart. Note that this will cause all data to be unavailable for about 1 minute. 266 Info. A volume-copy operation for the indicated master volume has been aborted. Recommended actions • No action required. 267 Error While cleaning up resources in metadata at the end of a background rollback process, the firmware found at least one error and suspended the process for the indicated volume. Recommended actions • Make sure that disks and vdisks associated with the rollback do not have problems (health OK, status FTOL or UP) and then retry the rollback. 268 Info. A background volume-copy operation for the indicated master volume has completed. Recommended actions • No action required. 269 Info. A partner firmware update operation has started. This operation is used to copy firmware from one controller to the other to bring both controllers up to the same version of firmware. Recommended actions • No action required. 28