HP Pavilion 11-n200 Maintenance and Service Guide - Page 41
sleeves must be installed on the antenna connectors, as shown in the following illustration.
![]() |
View all HP Pavilion 11-n200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
3. Remove the WWAN module (3) by pulling the module away from the slot. NOTE: WWAN modules are designed with a notch to prevent incorrect insertion. NOTE: If the WWAN antennas are not connected to the terminals on the WWAN module, the protective sleeves must be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure to install the WWAN module. Component replacement procedures 33
![](/manual_guide/products/hewlettpackard-pavilion-11n200-maintenance-service-guide-9cd9a56/41.png)
3.
Remove the WWAN module
(3)
by pulling the module away from the slot.
NOTE:
WWAN modules are designed with a notch to prevent incorrect insertion.
NOTE:
If the WWAN antennas are not connected to the terminals on the WWAN module, the protective
sleeves must be installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WWAN module.
Component replacement procedures
33