HP Pavilion 11-n200 Maintenance and Service Guide - Page 58
TouchPad button board, that secure the bracket, and then rotate the front of
![]() |
View all HP Pavilion 11-n200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
TouchPad button board Description TouchPad button board (includes bracket and cable) Spare part number not spared Before removing the TouchPad button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 26). 5. Remove the battery (see Battery on page 48). Remove the TouchPad button board: 1. Disconnect the TouchPad board cable from the system board (1). 2. Remove the two Phillips PM2.0×3.0 screws (2) that secure the bracket, and then rotate the front of the bracket up and lift it off the computer (4). 3. Remove the three Phillips PM2.0×2.0 broadhead screws (5) that secure the TouchPad button board to the computer. 4. Lift the foil and rubber gaskets from atop the left and right broadhead screw holes (1). 50 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
![](/manual_guide/products/hewlettpackard-pavilion-11n200-maintenance-service-guide-9cd9a56/58.png)