HP Pavilion 11-n200 Maintenance and Service Guide - Page 57

that secure the speakers to the computer., Disconnect the speaker cable from the system board

Get HP Pavilion 11-n200 PDF manuals and user guides View all HP Pavilion 11-n200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Speakers Description Speaker Kit (includes left and right speakers and cable) Spare part number 755738-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 26). 5. Remove the battery (see Battery on page 48). Remove the speakers: 1. Disconnect the speaker cable from the system board (1). 2. Remove the four Phillips PM2.0×6.0 broadhead screws (2) that secure the speakers to the computer. NOTE: Make note of the rubber gaskets (3) that fit around each screw. For installation, make sure the gaskets are properly installed. 3. Remove the speakers (4). Reverse this procedure to install the speakers. Component replacement procedures 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
Speakers
Description
Spare part number
Speaker Kit (includes left and right speakers and cable)
755738-001
Before removing the speakers, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
26
).
5.
Remove the battery (see
Battery
on page
48
).
Remove the speakers:
1.
Disconnect the speaker cable from the system board
(1)
.
2.
Remove the four Phillips PM2.0×6.0 broadhead screws
(2)
that secure the speakers to the computer.
NOTE:
Make note of the rubber gaskets
(3)
that
fit
around each screw. For installation, make sure the
gaskets are properly installed.
3.
Remove the speakers
(4)
.
Reverse this procedure to install the speakers.
Component replacement procedures
49