HP Pavilion 11-n200 Maintenance and Service Guide - Page 66

Power connector cable, Remove the bracket from the computer

Get HP Pavilion 11-n200 PDF manuals and user guides View all HP Pavilion 11-n200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

Power connector cable Description Power connector cable Spare part number 755727-001 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 26). 5. Remove the battery (see Battery on page 48). Remove the power connector cable: 1. Remove the black Phillips PM2.5×6.0 screw (1) that secures the bracket to the computer and the silver Phillips PM3.0×5.0 screw (2) that secures the right display hinge. 2. Open the display assembly right hinge (3) as far as it will open. 3. Remove the bracket from the computer (4). 4. Disconnect the power connector cable (5) from the system board. 5. Remove the power connector (6) from the computer. 6. Remove the power connector cable. Reverse this procedure to install the power connector cable. 58 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
Power connector cable
Description
Spare part number
Power connector cable
755727-001
Before removing the power connector cable, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
26
).
5.
Remove the battery (see
Battery
on page
48
).
Remove the power connector cable:
1.
Remove the black Phillips PM2.5×6.0 screw
(1)
that secures the bracket to the computer and the silver
Phillips PM3.0×5.0 screw
(2)
that secures the right display hinge.
2.
Open the display assembly right hinge
(3)
as far as it will open.
3.
Remove the bracket from the computer
(4)
.
4.
Disconnect the power connector cable
(5)
from the system board.
5.
Remove the power connector
(6)
from the computer.
6.
Remove the power connector cable.
Reverse this procedure to install the power connector cable.
58
Chapter 5
Removal and replacement procedures for Authorized Service Provider parts