HP Pavilion 14-al100 Maintenance and Service Guide - Page 52

Fan, Disconnect the fan cable

Get HP Pavilion 14-al100 PDF manuals and user guides View all HP Pavilion 14-al100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Fan Description Fan (includes cable) Spare part number 856206-001 Before removing the fan, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 32). 5. Remove the battery (see Battery on page 34). 6. Remove the WLAN module (see WLAN module on page 38). Remove the fan: 1. Disconnect the fan cable (1) from the system board. 2. Remove the three Phillips PM2.0×5.7 screws (2) that secure the fan to the keyboard/top cover. 3. Remove the fan (3). Reverse this procedure to install the fan. 44 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Fan
Description
Spare part number
Fan (includes cable)
856206-001
Before removing the fan, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
32
).
5.
Remove the battery (see
Battery
on page
34
).
6.
Remove the WLAN module (see
WLAN module
on page
38
).
Remove the fan:
1.
Disconnect the fan cable
(1)
from the system board.
2.
Remove the three Phillips PM2.0×5.7 screws
(2)
that secure the fan to the keyboard/top cover.
3.
Remove the fan
(3)
.
Reverse this procedure to install the fan.
44
Chapter 5
Removal and replacement procedures