HP Pavilion 14-al100 Maintenance and Service Guide - Page 62

Display assembly, Remove the bottom cover see

Get HP Pavilion 14-al100 PDF manuals and user guides View all HP Pavilion 14-al100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

c. Solid-state drive (see Solid-state drive on page 43) d. Fan (see Fan on page 44) e. System board (see System board on page 45) Remove the power connector cable: ▲ Remove the power connector cable. Reverse this procedure to install the power connector cable. Display assembly NOTE: The display assembly is spared at the subcomponent level only. For display assembly spare part information, see the individual removal subsections. Before removing the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 32). 5. Disconnect the battery cable from the system board (see Battery on page 34). Remove the display assembly: 1. Release the ZIF connector (1) to which the display panel cable is connected, and then disconnect the display panel cable from the system board. 54 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
c.
Solid-state drive (see
Solid-state drive
on page
43
)
d.
Fan (see
Fan
on page
44
)
e.
System board (see
System board
on page
45
)
Remove the power connector cable:
▲
Remove the power connector cable.
Reverse this procedure to install the power connector cable.
Display assembly
NOTE:
The display assembly is spared at the subcomponent level only. For display assembly spare part
information, see the individual removal subsections.
Before removing the display assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
32
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
34
).
Remove the display assembly:
1.
Release the ZIF connector
(1)
to which the display panel cable is connected, and then disconnect
the display panel cable from the system board.
54
Chapter 5
Removal and replacement procedures