HP Pavilion 14-al100 Maintenance and Service Guide - Page 61
Power connector cable
View all HP Pavilion 14-al100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
d. Fan (see Fan on page 44) e. System board (see System board on page 45) Remove the speakers: 1. Release the display panel cable from the routing channel (1) built into the left speaker. 2. Release the wireless antenna cables from the routing channel (2) built into the right speaker. 3. Remove the speakers (3). Reverse this procedure to install the speakers. Power connector cable Description Power connector cable Spare part number 808155-010 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 32), and then remove the following components: a. Battery (see Battery on page 34) b. WLAN module (see WLAN module on page 38) Component replacement procedures 53