HP Pavilion 14-bk100 Maintenance and Service Guide - Page 39

Bottom cover, Remove the upper rubber feet

Get HP Pavilion 14-bk100 PDF manuals and user guides View all HP Pavilion 14-bk100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Bottom cover Description Bottom cover - natural silver Bottom cover - Dixons Rubber Kit Spare part number 927911-001 938609-001 926855-001 Before removing the bottom cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 33). To remove the bottom cover: 1. Position the computer upside down with the front toward you. 2. Remove the upper rubber feet (1) so you can access the screws underneath. 3. Remove the two Phillips PM2.5×6.0 screws (2) that were under the upper rubber feet. 4. Remove the three remaining Phillips PM2.0×5.0 screws (3). Component replacement procedures 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Bottom cover
Description
Spare part number
Bottom cover – natural silver
927911-001
Bottom cover – Dixons
938609-001
Rubber Kit
926855-001
Before removing the bottom cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
33
).
To remove the bottom cover:
1.
Position the computer upside down with the front toward you.
2.
Remove the upper rubber feet
(1)
so you can access the screws underneath.
3.
Remove the two Phillips PM2.5×6.0 screws
(2)
that were under the upper rubber feet.
4.
Remove the three remaining Phillips PM2.0×5.0 screws
(3)
.
Component replacement procedures
31