HP Pavilion 14-bk100 Maintenance and Service Guide - Page 41

Battery, To remove the battery

Get HP Pavilion 14-bk100 PDF manuals and user guides View all HP Pavilion 14-bk100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Battery Description Battery, 4 cell, 70 Wh, 4.55 Ah Spare part number 920070-855 Before disassembling the computer, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 31). To remove the battery: 1. Remove the four Phillips PM2.0×5.0 screws (1) that secure the battery to the computer. 2. Pull the battery away from the system board connector, and then up and out of the computer (2). Reverse this procedure to install the battery. Component replacement procedures 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Battery
Description
Spare part number
Battery, 4 cell, 70 Wh, 4.55 Ah
920070-855
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
31
).
To remove the battery:
1.
Remove the four Phillips PM2.0×5.0 screws
(1)
that secure the battery to the computer.
2.
Pull the battery away from the system board connector, and then up and out of the computer
(2)
.
Reverse this procedure to install the battery.
Component replacement procedures
33