HP Pavilion 14-bk100 Maintenance and Service Guide - Page 52
TouchPad board, that secure the bracket to the computer, and the lift
View all HP Pavilion 14-bk100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
TouchPad board Description TouchPad board TouchPad bracket TouchPad board cable Spare part number 927923-001 926851-001 927916-001 Before removing the TouchPad board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 31). 5. Remove the battery (see Battery on page 33). To remove the TouchPad board: 1. Disconnect the cable from the system board (1). 2. Remove the three Phillips PM2.0×3.0 screws (2) that secure the bracket to the computer, and the lift the bracket from atop the TouchPad (3). 3. Remove the three Phillips broad head PM2.0×2.0 screws (4) that secure the TouchPad board to the computer, and the lift the TouchPad out of the computer (5). Reverse this procedure to install the TouchPad board. 44 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts