HP Pavilion 14-n100 Maintenance and Service Guide 1 - Page 55
Memory module, Remove the memory module
View all HP Pavilion 14-n100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Memory module Description 4 GB memory module (PC3, 12800, 1600 MHz) 2 GB memory module (PC3, 12800, 1600 MHz) 8 GB memory module (PC3, 12800, 1600 MHz) Spare part number 691740-001 691739-001 693374-001 NOTE: Before adding memory modules, make sure the computer has the most recent BIOS version, and update the BIOS if needed. For Windows operating systems, see Updating the BIOS on page 93; for Ubuntu Linux, see Updating the BIOS on page 98. Before removing a memory module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 42). 5. Remove the service door (see Service door on page 43). Remove the memory module: NOTE: Note the location of the memory module (1) you are removing. If you are replacing it, install the new memory module in the same slot. 1. Spread the two retaining tabs (1) on each side of the memory module slot to release the memory module. (The memory module tilts up.) Component replacement procedures 45