HP Pavilion 14-n100 Maintenance and Service Guide 1 - Page 79
Optical drive connector cable
View all HP Pavilion 14-n100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
6. Remove the TouchPad button board (5). Reverse this procedure to install the TouchPad button board. Optical drive connector cable NOTE: The optical drive connector cable is included with the Optical Drive, spare part number 734415-001. Before removing the optical drive connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 42), and then remove the following components: a. Service door (see Service door on page 43) b. Memory module (see Memory module on page 45) c. WLAN module (see WLAN module on page 47) d. Optical drive (see Optical drive on page 49) e. Keyboard (see Keyboard on page 55) f. Top cover (see Top cover on page 59) Remove the optical drive connector cable: Component replacement procedures 69