HP Pavilion 15-n100 Maintenance and Service Guide - Page 100
Remove the heat sink assembly, the four Phillips M2.0×10.0 captive screws
View all HP Pavilion 15-n100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Remove the heat sink assembly: 1. Turn the system board upside down, with the front toward you. NOTE: Steps 3 through 5 apply to computer models equipped with a graphics subsystem with discrete memory. See steps 6 and 8 for fan/heat sink assembly removal information for computer models equipped with a graphics subsystem with UMA memory. 2. Disconnect the fan cable from the system board. NOTE: Steps 3 through 5 apply to computer models equipped with a graphics subsystem with discrete memory. See steps 6 and 8 for fan/heat sink assembly removal information for computer models equipped with a graphics subsystem with UMA memory. 3. Following the 1, 2, 3, 4, 5, 6, 7 sequence stamped into the fan/heat sink assembly, loosen the four Phillips M2.0×10.0 captive screws (1) and the three Phillips M2.0×3.5 captive screws (2) that secure the fan/heat sink assembly to the system board. 4. Remove the heat sink assembly (3) from the system board. 90 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts