HP Pavilion 15-n100 Maintenance and Service Guide - Page 85
Optical drive connector cable, Top cover see
View all HP Pavilion 15-n100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Optical drive connector cable NOTE: The optical drive connector cable is included with the Optical Drive, spare part number 732075-001. Before removing the optical drive connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 45), and then remove the following components: a. Optical drive (see Optical drive on page 50). b. Service door (see Service door on page 47). c. WLAN module (see WLAN module on page 49). d. Memory module (see Memory module on page 47). e. Keyboard (see Keyboard on page 57). f. Top cover (see Top cover on page 63). Remove the optical drive connector cable: 1. Disconnect the optical drive connector cable (1) from the system board. 2. Release the optical drive connector cable from the clip (2) built into the base enclosure. Component replacement procedures 75