HP Pavilion 15-n100 Maintenance and Service Guide - Page 102
and the fan/heat sink assembly on the processor
View all HP Pavilion 15-n100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
7. Remove the heat sink assembly (2). Thoroughly clean the thermal connections (1) on the system board and the heat sink (2) before replacing a heat sink onto a system board. NOTE: The following illustration shows the replacement thermal material locations on a computer model equipped with a graphics subsystem with UMA memory. Thermal paste is used on the processor (1) and the fan/heat sink assembly section (2) that services it. 8. Reverse this procedure to install the fan/heat sink assembly. Replace the thermal material that ships with the replacement heat sink. 92 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
7.
Remove the heat sink assembly
(2)
.
Thoroughly clean the thermal connections
(1)
on the system board and the heat sink
(2)
before
replacing a heat sink onto a system board.
NOTE:
The following illustration shows the replacement thermal material locations on a
computer model equipped with a graphics subsystem with UMA memory. Thermal paste is used
on the processor
(1)
and the fan/heat sink assembly section
(2)
that services it.
8.
Reverse this procedure to install the fan/heat sink assembly. Replace the thermal material that
ships with the replacement heat sink.
92
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts