HP Pavilion 17-ab200 Maintenance and Service Guide - Page 61

USB board, Base enclosure see

Get HP Pavilion 17-ab200 PDF manuals and user guides View all HP Pavilion 17-ab200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

USB board Description USB board Spare part number 857470-001 Before removing the USB board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the following components: a. Battery (see Battery on page 37) b. Optical drive (see Optical drive on page 38) c. Base enclosure (see Base enclosure on page 40) d. Right speaker (see Right speaker on page 49) Remove the USB board: 1. Open the zero insertion force (ZIF) connector (1) and release the USB board cable. 2. Remove the two Phillips M2.0 × 4.0 screws (2) that secure the USB board to the computer. 3. Remove the USB board (3). Reverse this procedure to install the USB board. Component replacement procedures 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
USB board
Description
Spare part number
USB board
857470-001
Before removing the USB board, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the following components:
a.
Battery (see
Battery
on page
37
)
b.
Optical drive (see
Optical drive
on page
38
)
c.
Base enclosure (see
Base enclosure
on page
40
)
d.
Right speaker (see
Right speaker
on page
49
)
Remove the USB board:
1.
Open the zero insertion force (ZIF) connector
(1)
and release the USB board cable.
2.
Remove the two Phillips M2.0 × 4.0 screws
(2)
that secure the USB board to the computer.
3.
Remove the USB board
(3)
.
Reverse this procedure to install the USB board.
Component replacement procedures
51