HP Pavilion 17-ab200 Maintenance and Service Guide - Page 74
Power in connector
View all HP Pavilion 17-ab200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Power in connector Description Power in connector Spare part number 858021-001 Before removing the power in connector, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the following components: a. Battery (see Battery on page 37) b. Optical drive (see Optical drive on page 38) c. Base enclosure (see Base enclosure on page 40) d. Hard drive (see Hard drive on page 42) e. SSD (see SSD (M.2) on page 44) f. Disconnect the WLAN cable (see WLAN module on page 47) g. Right speaker (see Right speaker on page 49) h. USB board (see USB board on page 51) i. Fan (see Fan on page 52) j. Heat sink for discrete graphics memory (see Heat sink for discrete graphics memory on page 53) k. Left speaker (see Left speaker on page 55) l. System board (see System board on page 59) Remove the power in connector: 1. Release the clips (1) holding the power in connector. 64 Chapter 6 Removal and replacement procedures for authorized service provider parts