HP Pavilion Gaming 15-ak100 Maintenance and Service Guide - Page 63
Optical drive connector
View all HP Pavilion Gaming 15-ak100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
5. Remove the USB board (4). Reverse this procedure to install the USB board. Optical drive connector Description Optical drive connector Spare part number 811199-001 Before removing the optical drive connector, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34). 5. Remove the optical drive (see Optical drive on page 35). 6. Remove the bottom cover (see Bottom cover on page 38). To remove the optical drive connector: 1. Position the computer upright. 2. Disconnect the optical drive connector cable from the system board (1). 3. Remove the two Phillips PM2.5×3.0 screws (2) that secure the optical drive connector to the computer. Component replacement procedures 55