HP Pavilion Gaming 15-ak100 Maintenance and Service Guide - Page 65
To remove the system board, Speaker cable
View all HP Pavilion Gaming 15-ak100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34). 5. Remove the optical drive (see Optical drive on page 35). 6. Remove the bottom cover (see Bottom cover on page 38). NOTE: When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● Memory modules (see Memory module on page 47) ● WLAN module (see WLAN module on page 43) ● Heat sink assembly (see Heat sink assembly on page 49) ● Fan (see Fan on page 48) To remove the system board: 1. Position the computer upright, and then disconnect the following cables from the system board: (1): Speaker cable (2): Display cable (3): Power connector cable (4): Optical drive cable (5): Keyboard cable (6): Touchpad cable (7): Hard drive cable Component replacement procedures 57