HP Pavilion Gaming 15-ak100 Maintenance and Service Guide - Page 71

Power connector cable, from the left hinge that sits above the power connector.

Get HP Pavilion Gaming 15-ak100 PDF manuals and user guides View all HP Pavilion Gaming 15-ak100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

Power connector cable Description Power connector cable Spare part number 806746-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34). 5. Remove the optical drive (see Optical drive on page 35). 6. Remove the bottom cover (see Bottom cover on page 38). 7. Remove the system board (see System board on page 56). To remove the power connector cable: 1. Remove the Phillips PM2.5×3.0 screw (1) from the left hinge that sits above the power connector. 2. Rotate the hinge upward (2). 3. Pull the tab away from the connector (3), and then remove the power connector and cable (4) from the computer. Reverse this procedure to install the power connector cable. Component replacement procedures 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
Power connector cable
Description
Spare part number
Power connector cable
806746-001
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
34
).
5.
Remove the optical drive (see
Optical drive
on page
35
).
6.
Remove the bottom cover (see
Bottom cover
on page
38
).
7.
Remove the system board (see
System board
on page
56
).
To remove the power connector cable:
1.
Remove the Phillips PM2.5×3.0 screw
(1)
from the left hinge that sits above the power connector.
2.
Rotate the hinge upward
(2)
.
3.
Pull the tab away from the connector
(3)
, and then remove the power connector and cable
(4)
from the
computer.
Reverse this procedure to install the power connector cable.
Component replacement procedures
63