HP Pavilion Notebook - 14-v124ca HP Pavilion 14 Notebook PC HP Pavilion 14 Tou - Page 43

Optical drive, out from the front until the optical drive is completely removed

Get HP Pavilion Notebook - 14-v124ca PDF manuals and user guides View all HP Pavilion Notebook - 14-v124ca manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Reverse this procedure to install the memory module. Optical drive NOTE: The optical drive spare part kit includes a bezel and bracket. Description SuperMulti DVD±R/RW Double-Layer Drive Aqua blue finish Natural silver finish Snow white finish Vibrant red finish Spare part number 767251-001 767252-001 767250-001 767253-001 Before removing the optical drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 30). Remove the optical drive: 1. Using a small Phillips screwdriver, remove the Phillips M2.5×6.5 screw that secures the optical drive to the computer (1). 2. Pull the tray (2) out from the front until the optical drive is completely removed from the computer. If it is necessary to replace the optical drive bracket and bezel, position the optical drive with the rear panel toward you. Component replacement procedures 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Reverse this procedure to install the memory module.
Optical drive
NOTE:
The optical drive spare part kit includes a bezel and bracket.
Description
Spare part number
SuperMulti DVD±R/RW Double-Layer Drive
Aqua blue finish
767251-001
Natural silver finish
767252-001
Snow white finish
767250-001
Vibrant red finish
767253-001
Before removing the optical drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
30
).
Remove the optical drive:
1.
Using a small Phillips screwdriver, remove the Phillips M2.5×6.5 screw that secures the optical
drive to the computer
(1)
.
2.
Pull the tray
(2)
out from the front until the optical drive is completely removed from
the computer.
If it is necessary to replace the optical drive bracket and bezel, position the optical drive with the rear
panel toward you.
Component replacement procedures
33