HP Pavilion TouchSmart 11-e110nr HP Pavilion 11 Notebook PC HP Pavilion TouchS - Page 71

Media card reader board, Remove the Phillips PM2.0×4.5 screw

Get HP Pavilion TouchSmart 11-e110nr PDF manuals and user guides View all HP Pavilion TouchSmart 11-e110nr manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

Media card reader board Description Media card reader board (includes cable) Spare part number 730897-001 Before removing the media card reader board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 34), and then remove the following components: a. Service door (see Service door on page 35) b. Display assembly (see Display assembly on page 47) c. Bottom cover (see Bottom cover on page 55) Remove the media card reader board: 1. Release the ZIF connector (1) to which the media card reader board cable is attached, and then disconnect the media card reader board cable from the system board. 2. Remove the Phillips PM2.0×4.5 screw (2) that secures the media card reader board to the top cover. 3. Remove the media card reader board (3) and cable. Reverse this procedure to install the media card reader board. Component replacement procedures 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
Media card reader board
Description
Spare part number
Media card reader board (includes cable)
730897-001
Before removing the media card reader board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
34
), and then remove the following components:
a.
Service door (see
Service door
on page
35
)
b.
Display assembly (see
Display assembly
on page
47
)
c.
Bottom cover (see
Bottom cover
on page
55
)
Remove the media card reader board:
1.
Release the ZIF connector
(1)
to which the media card reader board cable is attached, and then
disconnect the media card reader board cable from the system board.
2.
Remove the Phillips PM2.0×4.5 screw
(2)
that secures the media card reader board to the
top cover.
3.
Remove the media card reader board
(3)
and cable.
Reverse this procedure to install the media card reader board.
Component replacement procedures
61