HP Pavilion TouchSmart 11-e110nr HP Pavilion 11 Notebook PC HP Pavilion TouchS - Page 76
Heat sink, Service door see
View all HP Pavilion TouchSmart 11-e110nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
6. Remove the system board (3) by sliding it up and to the left an angle. Reverse this procedure to install the system board. Heat sink Description Heat sink (includes 4 captive screws and replacement thermal material) Spare part number 730902-001 Before removing the heat sink, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 34), and then remove the following components: a. Service door (see Service door on page 35) b. Hard drive (see Hard drive on page 36) c. Display assembly (see Display assembly on page 47) d. Bottom cover (see Bottom cover on page 55) e. Media card reader board (see Media card reader board on page 61) 66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts