HP Pavilion TouchSmart 15-b100 HP Pavilion TouchSmart Sleekbook 15 and HP Pavi - Page 69
that secure the display assembly to the base enclosure., Remove the five Phillips screws
View all HP Pavilion TouchSmart 15-b100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
5. Remove the keyboard (see Keyboard on page 31). 6. Remove the top cover (see Top cover on page 35). 7. Remove the hard drive (see Hard drive on page 39). 8. Remove the USB board (see USB board on page 41). 9. Remove the WLAN (see WLAN module on page 42). 10. Remove the system board (see System board on page 45). Remove the display assembly: CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 1. Remove the five Phillips screws (1) that secure the display assembly to the base enclosure. 2. Remove the display assembly (2). NOTE: Steps 3 through 8 apply only to non-TouchScreen display assemblies. 3. If it is necessary to replace the display bezel or any of the display assembly subcomponents: a. Remove the screw covers (1). Component replacement procedures 61