HP Pavilion dm4 Maintenance and Service Guide - Page 61
Hard drive, that secure the hard drive cover to
View all HP Pavilion dm4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Hard drive NOTE: All hard drive spare part kits include a hard drive bracket. NOTE: The hard drive cable is included in the Misc Cable Kit, spare part number 608227-001. Description 750-GB, 7200 RPM 640-GB, 7200 RPM 500-GB, 7200 RPM 320-GB, 7200 RPM Hard drive mounting hardware Spare part number 678103-001 678102-001 678101-001 678100-001 672516-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 42). 5. Remove the memory/wireless module compartment cover (see Memory module on page 44) Remove the hard drive: 1. Position the computer with the front toward you. 2. Loosen the two captive Phillips PM2.5×5.0 screws (1) that secure the hard drive cover to the computer. 3. Lift the cover up at an angle (2) and remove it (3). The hard drive cover is included in the plastics kit, spare part number 608233-001. 4. Disconnect the hard drive cable from the system board (1). Component replacement procedures 53