HP Pavilion dm4 Maintenance and Service Guide - Page 87
Remove the three Phillips PM2.5×5.0 screws, that secure the system board to the computer.
View all HP Pavilion dm4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
e. Keyboard (see Keyboard on page 57) f. Top cover (see Top cover on page 59) g. Speaker assembly (see Speaker assembly on page 76) h. Display assembly (see Display assembly on page 65) i. USB board (see USB board on page 71) j. Power connector cable (see Power connector cable on page 72) 1. Turn the computer upright with the left side toward you. 2. Remove the three Phillips PM2.5×5.0 screws (1) that secure the system board to the computer. 3. Loosen the captive screw in the fan sink that secures the system board (2). 4. Lift the right side of the system board (3). 5. Release the system board by sliding it to the right at an angle (4) until the connectors on the left side of the system board clear the base enclosure, and then remove the system board. Reverse the preceding procedure to install the system board. Component replacement procedures 79