HP Photosmart 2700 Setup Guide - Page 10
Connect the Ethernet cable
![]() |
View all HP Photosmart 2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Section B: Ethernet (Wired) Network B1 Connect the Ethernet cable a a Remove the yellow plug from the back of the device. b Connect one end of the Ethernet cable to the Ethernet port on the back of the device. c Connect the other end of the Ethernet cable to the hub/router/ switch. If the cable is not long enough, you can purchase a longer cable. Important: Do not connect the Ethernet cable to a cable b modem. You must have a working network. If you already connected the USB cable, do not connect the Ethernet cable. c 10 • HP all-in-one
![](/manual_guide/products/hewlettpackard-photosmart-2700-setup-guide-17a6f12/10.png)
B1
10 • HP all-in-one
a
Remove the yellow plug from the back of the device.
b
Connect one end of the Ethernet cable to the Ethernet port on
the back of the device.
c
Connect the other end of the Ethernet cable to the hub/router/
switch. If the cable is not long enough, you can purchase a
longer cable.
Important:
Do not connect the Ethernet cable to a cable
modem. You must have a working network. If you already
connected the USB cable, do not connect the Ethernet cable.
Connect the Ethernet cable
c
b
a
Section B: Ethernet (Wired) Network