HP Photosmart 2700 Setup Guide - Page 7

16 Choose ONE connection type (A or B or C) A: USB Connection Use this connection type if you want to connect the device directly to one computer. (Do not connect until the software instructs you to.) Equipment needed: USB cable. For a USB connection, go to Section A for instructions. B: Ethernet (Wired) Network Use this connection type if you want an Ethernet cable connection between the device and your network. Equipment needed: hub/router/switch and Ethernet cable. For an Ethernet cable connection, go to Section B for instructions. C: Wireless (Access Point) Connection Use this connection type if you want a wireless (802.11 b or g) connection between the device and your network. Requires a wireless hub or access point.* For a wireless access point connection, go to Section C for instructions. *If you do not have an access point, but want to connect your wireless computer to the device, see the Connect to a wireless network without an access point chapter in the Network Guide. If you are not connecting the device to a computer or network, continue to the Fax Setup chapter in the User Guide. 7 • HP all-in-one