HP Photosmart 3100 User Guide - Page 41
Case E: Shared voice/fax line, Back view of the HP All-in-One
View all HP Photosmart 3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 3 short, see The phone cord that came with my HP All-in-One is not long enough for information on extending it. 2. Set the Auto Answer setting to On. For information on changing this setting, see Set the answer mode. 3. Change the Answer Ring Pattern setting to match the pattern that the telephone company assigned to your fax number. For information on changing this setting, see Change the answer ring pattern (distinctive ringing). Note By default, your HP All-in-One is set to answer all ring patterns. If you do not set the Answer Ring Pattern to match the ring pattern assigned to your fax number, your HP All-in-One might answer both voice calls and fax calls or it might not answer at all. 4. (Optional) Change the Rings to Answer setting to the lowest setting (two rings). For information on changing this setting, see Set the number of rings before answering. 5. Run a fax test. For information, see Test your fax setup. Your HP All-in-One will automatically answer incoming calls that have the ring pattern you selected (Answer Ring Pattern setting) after the number of rings you selected (Rings to Answer setting). Then it will begin emitting fax reception tones to the sending fax machine and receive the fax. Case E: Shared voice/fax line If you receive both voice calls and fax calls at the same phone number, and you have no other office equipment (or voice mail) on this phone line, set up your HP All-in-One as described in this section. Finish setup Back view of the HP All-in-One 1 Telephone wall jack 2 Phone cord supplied in the box with your HP All-in-One connected to the "1-LINE" port 3 Telephone (optional) 38 HP Photosmart 3100 All-in-One series