HP Photosmart C4200 Basics Guide - Page 19

Technical information, System requirements, Product specifications, Print cartridge yield - printer software

Page 19 highlights

3 Technical information The technical specifications and international regulatory information for the HP All-in-One are provided in this section. System requirements Software system requirements are located in the Readme file. Product specifications For product specifications, go to the HP Web site at www.hp.com/support. Paper specifications • Input tray capacity: Plain paper sheets: Up to 100 (20 lb./75 gsm. paper) • Output tray capacity: Plain paper sheets: Up to 50 (20 lb./75 gsm. paper) NOTE: For a complete list of supported media sizes, see the printer software. Physical specifications • Height: 16.97 cm (7.0 inches) • Width: 44 cm (16.8 inches) • Depth: 25.9 cm (10.2 inches) • Weight: 4.5 kg (10 pounds) Power specifications • Power consumption: 25 watts maximum (average printing) • Input voltage: AC 100 to 240 V ~ 600 mA 50-60 Hz • Output voltage: DC 32 V===375 mA, 16 V===500 mA NOTE: Use only with the power adapter supplied by HP. Environmental specifications • Recommended operating temperature range: 15º to 32º C (59º to 90º F) • Allowable operating temperature range: 5º to 35º C (41º to 95º F) • Humidity: 15% to 80% RH non-condensing • Non-operating (Storage) temperature range: -20º to 50º C (-4º to 122º F) • In the presence of high electromagnetic fields, it is possible the output from the HP All-in-One may be slightly distorted • HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize injected noise due to potential high electromagnetic fields Print cartridge yield Ink from the cartridges is used in the printing process in a number of different ways, including in the initialization process, which prepares the device and cartridges for printing, and in printhead servicing, which keeps print nozzles clear and ink flowing smoothly. In addition, some residual ink is left in the cartridge after it is used. For more information, see www.hp.com/go/inkusage. Visit www.hp.com/pageyield for more information on estimated cartridge yields. Regulatory notices The HP All-in-One meets product requirements from regulatory agencies in your country/region. For a complete listing of regulatory notices, see the onscreen Help. Technical information Technical information 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23

3
Technical information
The technical specifications and international regulatory information for the HP All-in-One are
provided in this section.
System requirements
Software system requirements are located in the Readme file.
Product specifications
For product specifications, go to the HP Web site at
www.hp.com/support
.
Paper specifications
Input tray capacity: Plain paper sheets: Up to 100 (20 lb./75 gsm. paper)
Output tray capacity: Plain paper sheets: Up to 50 (20 lb./75 gsm. paper)
NOTE:
For a complete list of supported media sizes, see the printer software.
Physical specifications
Height: 16.97 cm (7.0 inches)
Width: 44 cm (16.8 inches)
Depth: 25.9 cm (10.2 inches)
Weight: 4.5 kg (10 pounds)
Power specifications
Power consumption: 25 watts maximum (average printing)
Input voltage: AC 100 to 240 V ~ 600 mA 50–60 Hz
Output voltage: DC 32 V===375 mA, 16 V===500 mA
NOTE:
Use only with the power adapter supplied by HP.
Environmental specifications
Recommended operating temperature range: 15º to 32º C (59º to 90º F)
Allowable operating temperature range: 5º to 35º C (41º to 95º F)
Humidity: 15% to 80% RH non-condensing
Non-operating (Storage) temperature range: –20º to 50º C (–4º to 122º F)
In the presence of high electromagnetic fields, it is possible the output from the HP All-in-One
may be slightly distorted
HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize
injected noise due to potential high electromagnetic fields
Print cartridge yield
Ink from the cartridges is used in the printing process in a number of different ways, including in the
initialization process, which prepares the device and cartridges for printing, and in printhead
servicing, which keeps print nozzles clear and ink flowing smoothly. In addition, some residual ink
is left in the cartridge after it is used. For more information, see
www.hp.com/go/inkusage
.
Visit
www.hp.com/pageyield
for more information on estimated cartridge yields.
Regulatory notices
The HP All-in-One meets product requirements from regulatory agencies in your country/region. For
a complete listing of regulatory notices, see the onscreen Help.
Technical information
17
Technical information