HP Presario 1600 Presario 1650 Series Maintenance and Service Guide - Page 22
Preliminary Steps
View all HP Presario 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Maintenance & Service Guide Presario 1600 Series Models: 1650 and 1655 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Preliminary Steps Before running POST, complete the following preliminary steps: 1. If a power-on password has been established, type the password and press the Enter key. If the password is not known, clear the password. 2. Run Computer Checkup. 3. Turn off the computer and its external devices. 4. Disconnect any external devices that you do not want to test. Do not disconnect the printer if you want to test it or use it to log error messages. If the problem only occurs when an external device is connected to the computer, the problem may be related to the external IMPORTANT: device or its cable. Verify this by running POST with and without the external device connected. 5. Install loopback plugs in the serial and parallel connectors if you would like to test these ports. 6. Ensure the hard drive is installed in the computer. 7. Ensure that the battery pack is inserted in the computer and the computer is connected to an external AC power source. When the preliminary steps are completed, you are ready to run POST.