HP Presario 1600 Presario 1650 Series Maintenance and Service Guide - Page 50

Return to Removal & Replacement, Procedures

Get HP Presario 1600 - Notebook PC PDF manuals and user guides View all HP Presario 1600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

Maintenance & Service Guide Presario 1600 Series Models: 1650 and 1655 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations 4. Turn the computer over (right side up), pull forward on the display latches to release and open the display assembly. 5. Lift up front end of the palmrest cover with touch pad and remove it from the groove in the chassis. 6. Tilt the palmrest cover with touch pad, allowing it to rest on top of the keyboard, and disconnect the flex cable from the LIF connector on the palmrest cover. CAUTION: When replacing the palmrest cover with touch pad, ensure that the cable is fully inserted into the LIF connector on the system board. If the metal end should come in contact with the keyboard, damage may occur to the computer. To replace the palmrest cover with touch pad, reverse the previous procedures. Return to Removal & Replacement Procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Maintenance & Service Guide
Presario 1600 Series
Models: 1650 and 1655
|
Home Page
|
Notice
|
Preface
|
Product Description
|
Troubleshooting
Illustrated Parts Catalog
|
Removal & Replacement Procedures
|
Specifications
Pin Assignments
|
Battery Pack Operations
4. Turn the computer over (right side up),
pull forward on the display latches to release
and open the display assembly.
5. Lift up front end of the palmrest cover
with touch pad and remove it from the
groove in the chassis.
6. Tilt the palmrest cover with touch pad,
allowing it to rest on top of the keyboard,
and disconnect the flex cable from the LIF
connector on the palmrest cover.
CAUTION:
When replacing the
palmrest cover with touch pad, ensure
that the cable is fully inserted into the
LIF connector on the system board. If
the metal end should come in contact
with the keyboard, damage may occur
to the computer.
To replace the palmrest cover with touch
pad, reverse the previous procedures.
Return to Removal & Replacement
Procedures